Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
f1-door-elevator-1unreviewed · printed
first_floor_door_dimension_width_candidate
3'-6"3.5 ft
Authoring eligibility: none. Placement eligibility: none. Dependency: Confirm W217 title block and whether dimension endpoints describe clear opening or door panels. Source audit state: conditional.
IMG_1097 · sheet-W217-candidate · Locate on drawing ↗Drawing notation: B 1 2 3 4 5 6 7; ELEVATOR POSITION INDICATOR; 3'-6"; 6'-9 3/4"; METAL ELEVATOR DOORS; CAST ORNAMENT; MARBLE PLINTH
W229 directs the first-floor Elevators 1 and 2 detail to W217, and the photographed elevation matches that subject, but this close-up does not include a readable title block. Numeric door records remain conditional until the W217 sheet identity and dimension endpoints are checked. Circled MODEL NO. 32/33/34 marks are detail-part model numbers, not elevator identities.
IMG_1129 · sheet-W229 · Locate on drawing ↗Drawing notation: For typical elevator doors and cab details see Sh. 214. For detail of elevators No. 1 and 2 at first floor see Sh. 217. For detail of elevator No. 2 see Sh. 230. For detail of elevator No. 3 see Sh. 231.
f1-door-elevator-1unreviewed · printed
first_floor_door_dimension_height_candidate
6'-9 3/4"6.8125 ft
Authoring eligibility: none. Placement eligibility: none. Dependency: Confirm W217 title block and vertical endpoints. Source audit state: conditional.
IMG_1097 · sheet-W217-candidate · Locate on drawing ↗Drawing notation: B 1 2 3 4 5 6 7; ELEVATOR POSITION INDICATOR; 3'-6"; 6'-9 3/4"; METAL ELEVATOR DOORS; CAST ORNAMENT; MARBLE PLINTH
W229 directs the first-floor Elevators 1 and 2 detail to W217, and the photographed elevation matches that subject, but this close-up does not include a readable title block. Numeric door records remain conditional until the W217 sheet identity and dimension endpoints are checked. Circled MODEL NO. 32/33/34 marks are detail-part model numbers, not elevator identities.
IMG_1129 · sheet-W229 · Locate on drawing ↗Drawing notation: For typical elevator doors and cab details see Sh. 214. For detail of elevators No. 1 and 2 at first floor see Sh. 217. For detail of elevator No. 2 see Sh. 230. For detail of elevator No. 3 see Sh. 231.
f1-door-elevator-2unreviewed · printed
first_floor_door_dimension_width_candidate
3'-6"3.5 ft
Authoring eligibility: none. Placement eligibility: none. Dependency: Confirm W217 title block and whether dimension endpoints describe clear opening or door panels. Source audit state: conditional.
IMG_1097 · sheet-W217-candidate · Locate on drawing ↗Drawing notation: B 1 2 3 4 5 6 7; ELEVATOR POSITION INDICATOR; 3'-6"; 6'-9 3/4"; METAL ELEVATOR DOORS; CAST ORNAMENT; MARBLE PLINTH
W229 directs the first-floor Elevators 1 and 2 detail to W217, and the photographed elevation matches that subject, but this close-up does not include a readable title block. Numeric door records remain conditional until the W217 sheet identity and dimension endpoints are checked. Circled MODEL NO. 32/33/34 marks are detail-part model numbers, not elevator identities.
IMG_1129 · sheet-W229 · Locate on drawing ↗Drawing notation: For typical elevator doors and cab details see Sh. 214. For detail of elevators No. 1 and 2 at first floor see Sh. 217. For detail of elevator No. 2 see Sh. 230. For detail of elevator No. 3 see Sh. 231.
f1-door-elevator-2unreviewed · printed
first_floor_door_dimension_height_candidate
6'-9 3/4"6.8125 ft
Authoring eligibility: none. Placement eligibility: none. Dependency: Confirm W217 title block and vertical endpoints. Source audit state: conditional.
IMG_1097 · sheet-W217-candidate · Locate on drawing ↗Drawing notation: B 1 2 3 4 5 6 7; ELEVATOR POSITION INDICATOR; 3'-6"; 6'-9 3/4"; METAL ELEVATOR DOORS; CAST ORNAMENT; MARBLE PLINTH
W229 directs the first-floor Elevators 1 and 2 detail to W217, and the photographed elevation matches that subject, but this close-up does not include a readable title block. Numeric door records remain conditional until the W217 sheet identity and dimension endpoints are checked. Circled MODEL NO. 32/33/34 marks are detail-part model numbers, not elevator identities.
IMG_1129 · sheet-W229 · Locate on drawing ↗Drawing notation: For typical elevator doors and cab details see Sh. 214. For detail of elevators No. 1 and 2 at first floor see Sh. 217. For detail of elevator No. 2 see Sh. 230. For detail of elevator No. 3 see Sh. 231.
f1-elevator-doors-1-2-w217-detail-candidateunreviewed · printed
door_material_and_ornament
METAL ELEVATOR DOORS; CAST ORNAMENT; MARBLE PLINTHAuthoring eligibility: descriptive-only. Placement eligibility: none. Dependency: Confirm W217 title block. Source audit state: conditional.
IMG_1097 · sheet-W217-candidate · Locate on drawing ↗Drawing notation: B 1 2 3 4 5 6 7; ELEVATOR POSITION INDICATOR; 3'-6"; 6'-9 3/4"; METAL ELEVATOR DOORS; CAST ORNAMENT; MARBLE PLINTH
W229 directs the first-floor Elevators 1 and 2 detail to W217, and the photographed elevation matches that subject, but this close-up does not include a readable title block. Numeric door records remain conditional until the W217 sheet identity and dimension endpoints are checked. Circled MODEL NO. 32/33/34 marks are detail-part model numbers, not elevator identities.
IMG_1129 · sheet-W229 · Locate on drawing ↗Drawing notation: For typical elevator doors and cab details see Sh. 214. For detail of elevators No. 1 and 2 at first floor see Sh. 217. For detail of elevator No. 2 see Sh. 230. For detail of elevator No. 3 see Sh. 231.
f1-elevator-doors-1-2-w217-detail-candidateunreviewed · printed
position_indicator_marks
B 1 2 3 4 5 6 7; ELEVATOR POSITION INDICATORAuthoring eligibility: descriptive-only. Placement eligibility: none. Dependency: Confirm W217 title block. Source audit state: conditional.
IMG_1097 · sheet-W217-candidate · Locate on drawing ↗Drawing notation: B 1 2 3 4 5 6 7; ELEVATOR POSITION INDICATOR; 3'-6"; 6'-9 3/4"; METAL ELEVATOR DOORS; CAST ORNAMENT; MARBLE PLINTH
W229 directs the first-floor Elevators 1 and 2 detail to W217, and the photographed elevation matches that subject, but this close-up does not include a readable title block. Numeric door records remain conditional until the W217 sheet identity and dimension endpoints are checked. Circled MODEL NO. 32/33/34 marks are detail-part model numbers, not elevator identities.
IMG_1129 · sheet-W229 · Locate on drawing ↗Drawing notation: For typical elevator doors and cab details see Sh. 214. For detail of elevators No. 1 and 2 at first floor see Sh. 217. For detail of elevator No. 2 see Sh. 230. For detail of elevator No. 3 see Sh. 231.
f1-door-elevator-2verified · printed
w217_entrance_detail_applicability
YesThe W217 plan immediately below the matched elevation labels this entrance ELEVATOR No. 2. W229 independently directs the first-floor detail of Elevators No. 1 and 2 to Sheet 217. Authoring eligibility: eligible-local-W217-detail.
f1-door-elevator-1verified · printed
w217_entrance_detail_applicability
YesThe words ELEVATOR 1 SIMILAR and PLAN FOR LOCATION are readable on W217. The short sheet/location token between them is not securely readable and remains untranscribed. W229 independently directs the first-floor detail of Elevators No. 1 and 2 to Sheet 217. Authoring eligibility: eligible-local-W217-detail. Missing: Unreadable sheet/location token within the printed similarity note.
type-W219-typical-landing-doorverified · printed
referenced_sheet_number
FOR TYPICAL ELEVATOR DOORS AND CAB DETAILS, SEE SH. 219.typical elevator doors and cab details Authoring eligibility: eligible-source-attribution.
detail-1129-sixth-enclosureverified · printed
head_channel_depth
6" CHANNEL6 in
Sixth-floor typical head steel channel callout; channel section weight pending.
detail-1129-sixth-enclosureverified · printed
jamb_channel_depth
6" CHANNEL6 in
Sixth/seventh-floor typical jamb section channel; material inferred by channel drawing is not added.
IMG_1129 · Locate on drawing ↗Drawing notation: 6" CHANNEL
Sixth/seventh-floor typical jamb section channel; material inferred by channel drawing is not added.
detail-img1129-elevator2-steel-trapverified · printed
trap_leaf_exception
NOTE: ELEVATOR NO. 2 TO HAVE SINGLE LEAF TRAP DOOR1 count
Explicit elevator 2 exception to adjacent steel-trap detail. One leaf, not one installation; no trap location/size inferred.
IMG_1129 · W-229 · Locate on drawing ↗Drawing notation: NOTE: ELEVATOR NO. 2 TO HAVE SINGLE LEAF TRAP DOOR
Explicit elevator 2 exception to adjacent steel-trap detail. One leaf, not one installation; no trap location/size inferred.
detail-img1129-elevator2-steel-trapverified · printed
trap_pull_hardware
C.I. DROP HANDLECast-iron drop-handle callout in plan looking up at trap door; complete hardware dimensions pending.
detail-1129-sixth-enclosureverified · printed
head_backset_chain
1 1/2"1.5 in
Upper horizontal chain of sixth-floor head; local witness endpoints, not opening width.
detail-1129-sixth-enclosureverified · printed
head_outer_chain_offset
4 3/4"4.75 in
Head horizontal witness from channel-side datum to fascia plane.
detail-1129-sixth-enclosureverified · printed
head_cover_gauge
14 GA. STEEL HINGED OR REMOVABLE COVER PLATE14 gauge
Gauge designation retained as gauge; no gauge-to-thickness conversion.
detail-1129-sixth-enclosureverified · printed
head_cover_material_and_access
14 GA. STEEL HINGED OR REMOVABLE COVER PLATEExplicit steel cover and allowed hinged/removable alternatives; no installed selection inferred.
IMG_1129 · W-229 · Locate on drawing ↗Drawing notation: 14 GA. STEEL HINGED OR REMOVABLE COVER PLATE
Explicit steel cover and allowed hinged/removable alternatives; no installed selection inferred.
detail-1129-sixth-enclosureverified · printed
hinge_plate_thickness
3/16" STEEL HINGE PLATE0.1875 in
Printed hinge plate thickness, not channel wall thickness.
detail-1129-sixth-enclosureverified · printed
hinge_plate_material
3/16" STEEL HINGE PLATESteel material explicitly stated.
detail-1129-sixth-enclosureverified · printed
sill_fascia_gauge
14 GA. STEEL FACIA14 gauge
Fascia designation in sixth-floor sill detail.
detail-1129-sixth-enclosureverified · printed
sill_fascia_material
14 GA. STEEL FACIAPrinted steel fascia in sill detail.
detail-1129-sixth-enclosureverified · printed
sixth_sill_width
6 3/8"6.375 in
Local width witness of anti-slip bronze sill section; operating door width not implied.
detail-1129-sixth-enclosureverified · printed
jamb_horizontal_outer_offset
4 3/4"4.75 in
Horizontal outer chain at sixth/seventh-floor jamb detail.
detail-1129-sixth-enclosureverified · printed
jamb_sill_width
5 5/8"5.625 in
Lower horizontal chain at jamb-detail sill; exact endpoint finish classification pending.
doorway-20261012h-1129-trap-planverified · printed
left internal horizontal witness span
1'-6"18 in
Local plan dimension inside left leaf representation, not complete installed trap width.
doorway-20261012h-1129-trap-planverified · printed
right vertical plan witness span
2'-0"24 in
Local vertical dimension on underside plan; not applied to machine-room trap size.
doorway-20261012h-1129-trap-planunreviewed · observed
plate thickness unresolved
[fraction before CHECKERED STEEL PLATE unresolved]Numeric value unresolved
Crop improves lettering but fraction cannot be verified; does not replace prior null in IMG_1126 report.
IMG_1129 · W-229 · Locate on drawing ↗Drawing notation: [fraction before CHECKERED STEEL PLATE unresolved]
Crop improves lettering but fraction cannot be verified; does not replace prior null in IMG_1126 report.
detail-img1129-elevator2-steel-trapverified · printed
checker_plate_thickness_resolution
¼″ CHECKERED STEEL PLATE0.25 in
Separate numeric printed plate fraction at R-R/S-S trap sections. Same photographic layer; no installed leaf thickness or applicability beyond source detail.
IMG_1129 · W-229 · Locate on drawing ↗Drawing notation: ¼″ CHECKERED STEEL PLATE
Separate numeric printed plate fraction at R-R/S-S trap sections. Same photographic layer; no installed leaf thickness or applicability beyond source detail.
Calculated from: doorway-20261012h-1129-003
detail-img1129-elevator2-steel-trapillegible · printed
trap_countersunk_fixing_size_unresolved
[countersunk fixing note; diameter/thread/fixing noun unresolved]Numeric value unresolved
Fine fixing note below S-S remains too blurred for exact fastener type or size; no nominal fastener inferred.
IMG_1129 · W-229 · Locate on drawing ↗Drawing notation: [countersunk fixing note; diameter/thread/fixing noun unresolved]
Fine fixing note below S-S remains too blurred for exact fastener type or size; no nominal fastener inferred.
door-img1126-later-head-jambverified · printed
later_head_fascia_plate_gauge
14 GA. STEEL FACIA PLATE14 gauge
Printed later-head fascia stock gauge, independent of plate-and-buck thickness and sixth-floor variant.
door-img1126-later-head-jambverified · printed
later_head_fascia_plate_material
14 GA. STEEL FACIA PLATEPrinted steel fascia plate, preserving FACIA spelling; no gauge-to-inch conversion or alloy inferred.
door-img1126-later-head-jambverified · printed
later_head_cover_plate_gauge
14 GA. REMOVABLE OR HINGED COVER PLATE14 gauge
Cover gauge is distinct from steel-nickel buck and fascia stock.
door-img1126-later-head-jambverified · printed
later_head_cover_access_relationship
14 GA. REMOVABLE OR HINGED COVER PLATEPrinted alternatives removable or hinged; does not establish hinge or fixing sizes.
door-img1126-later-head-jambverified · printed
later_jamb_sill_material
ANTI-SLIP BRONZE SILLPrinted bronze sill in later jamb view; small Elevator3 first-floor exception retained separately.
door-img1126-later-head-jambverified · printed
later_sill_material
ANTI-SLIP BRONZE SILLPrinted common sill section material/surface. Separate source property from first/sixth-floor sill.
door-img1126-later-head-jambverified · printed
later_sill_horizontal_witness
11½″11.5 in
Sill-section horizontal witness across depicted bronze sill assembly; end classes and installed threshold span unresolved, not entrance clear width.
IMG_1129 · W-229 · Locate on drawing ↗Drawing notation: 11½″
Sill-section horizontal witness across depicted bronze sill assembly; end classes and installed threshold span unresolved, not entrance clear width.
door-img1126-later-head-jambverified · printed
later_sill_anchor_plate_thickness
3/16″ BENT UP ANGLES ANCHORED TO STEEL I BEAM IN AN APPROVED MANNER0.1875 in
Printed thickness prefix of bent-up angle anchors; leg dimensions, profile and attachment method not established.
IMG_1129 · W-229 · Locate on drawing ↗Drawing notation: 3/16″ BENT UP ANGLES ANCHORED TO STEEL I BEAM IN AN APPROVED MANNER
Printed thickness prefix of bent-up angle anchors; leg dimensions, profile and attachment method not established.
Calculated from: core1013j-img_1129-m004
door-img1126-later-head-jambverified · printed
later_sill_slot_short_dimension
9/16″ × 1½″ SLOTS0.5625 in
Short slot dimension in sill fixing note; no slot count or installed station inferred.
door-img1126-later-head-jambverified · printed
later_sill_slot_long_dimension
9/16″ × 1½″ SLOTS1.5 in
Long slot dimension separately recorded from same printed note; not bolt length.
door-img1126-later-head-jambillegible · printed
later_sill_bolt_length_unresolved
[bolt head/diameter/length prefix not securely transcribed]Numeric value unresolved
Bolts are named, but exact head/diameter/length glyph sequence requires a clearer witness. No fraction reconstructed from expected hardware.
IMG_1129 · W-229 · Locate on drawing ↗Drawing notation: [bolt head/diameter/length prefix not securely transcribed]
Bolts are named, but exact head/diameter/length glyph sequence requires a clearer witness. No fraction reconstructed from expected hardware.