IMG_1126 · Folder 191DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES
Sheet W229
Extraction: Reviewed · extraction partial. Bounded first-floor elevator audit: DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES. First-floor Elevator No. 1 plan, column marks, axis order, clear-hatch labels and local offset witnesses. Elevator detail-to-W3 physical-placement gate: DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES. W229 first-floor Elevator 1 enclosure and clear hatch: classification of the 2'-0 1/4" horizontal witness between the west outside enclosure face and Column 74 centerline, plus the 4'-0" vertical witness from Column 71 centerline to the south clear-hatch edge and the resulting 10'-0" north-south clear-hatch edge pair. Partial entrance-registration review: Targeted review confirms that the first-floor landing entrance is on the page-top/south enclosure face and runs in the W229 local-u direction, which the accepted symbolic column frame maps to building +X west/Broadway. The crop does not establish wall thickness or a physical face offset. Bounded W229 seventh-floor review of the Elevator No. 1 east-west outside-enclosure dimension chain on the Column 73-74 row. Elevator-front bounded gate: Elevator 1 south landing face direction and one-axis enclosure/hatch controls. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Partial timed visual review: OCR, queue and existing extraction packages searched first. One sequential upright WebP inspection; only additive selected properties recorded. Previously verified readings reused without duplication. No complete extraction or accepted geometry. Partial timed visual review: OCR and existing text packages searched before one sequential upright WebP inspection. Additive region review; existing verified properties reused, not copied. No accepted geometry or cross-floor connection. Partial timed visual review: Text-first additive targeted review. Upright access-image coordinates; crops retain upright orientation. Source-local components only; existing verified records reused, not copied. Full image extraction remains incomplete. Partial timed visual review: Targeted additive review. Master crops preserve upright orientation and regions reference the full upright access image. Source-local head profile only; dimensions do not establish an installed opening or geometry. Earlier trap and jamb readings retained in their packages. Partial timed visual review: Selected original photographic layer; no revision authority or installed geometry accepted. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: Source-local detail/region evidence only. Printed type/floor applicability does not establish installed occurrences.
Highlighted reading: 3/16″ STEEL NICKEL PLATE & BUCK. Fraction belongs to later head plate-and-buck leader; original photographic layer only. Does not establish alloy, nickel process, installed thickness or applicability beyond the separate printed caption.
Show every recorded property on this drawing →
Unresolved extraction work
- Accepted world wall faces and exact shaft polygons for all three elevators
- Registered relationship between W229/W230/W231 detail coordinates and W3 world coordinates
- Rough-versus-finished enclosure wall planes and wall thicknesses
- W217 title-block confirmation and exact endpoint interpretation for the 3'-6" and 6'-9 3/4" door readings
- Exact first-floor Elevator 3 door width, height, jamb/head/sill and rough opening
- Readable Elevator 3 vertical hatch/shaft witness
- Car/cab/platform sizes, rail/counterweight coordinates, pit depths and overhead clearances
- Accepted ramp length, slope and threshold build-up at Elevator 3
- Architecturally accepted reconciliation of all floor traces, especially the fourth-floor mechanical underlay
- Offset witness endpoints and exact hatch-to-axis coordinates remain unresolved.
- For W229, the west outside enclosure face is fixed at world X = -65.020833 ft and the south/north clear-hatch edges are fixed at world Z = 46/56 ft; both clear-hatch world-X edges remain unresolved. For W230, the east outside enclosure face is fixed at X = 65.020833 ft and the clear-hatch east/west edges at X = 66.083333/73.083333 ft; both clear-hatch world-Z edges remain unresolved. Both elevators still lack finite enclosure-face endpoints, opposite faces, wall thickness and complete hatch-to-wall construction.
- For W231, an exact non-collinear column/grid frame and a complete, classified shaft or clear-hatch width/depth chain.
- Rough-face versus finish-face classification and wall thickness for each enclosure side.
- Independently accepted matching W3 hatch or shaft faces and a reported hold-out corner residual.
- Pit depth, overhead, slab opening and cross-floor continuation evidence for each elevator independently.
- World wall plane and jamb-center/inside-jamb offsets for all three entrances.
- Operating clear width and height, rough opening, leaf overlap/travel, sill, head and wall-thickness build-up.
- Elevator 3 first-floor entrance dimensions and endpoint classes.
- An independent check tying each local door centerline to the corresponding W3 landing wall.
- Cab-to-hatch origin, platform size and inside-clear dimensions.
- Guide-rail, counterweight and bracket centerlines tied to classified hatch faces.
- Confirmed assignment of W219 Cab E elevations to Elevator 1, 2 or 3.
- Door operator, travel/pocket and emergency-exit geometry.
- Dimensioned horizontal extents and wall-face endpoints for the Elevator 1 vestibule and Elevator 2 Broadway foyer thresholds.
- Elevator 3 ramp length, slope, threshold build-up and exact landing boundary at EL. 93.25 and EL. 95.33.
- Registered sill/head coordinates and independent correspondence to W3 landing traces.
- As-built confirmation before accepting vertical shaft or landing continuity.
- North and south endpoints of the accepted face
- Enclosure wall thickness and opposite wall face
- World X coordinates of the 7-foot clear-hatch edges and their relationship to the accepted outside face
- Vertical extent, floor/pit/overhead continuation and as-built correspondence
- Complete physical shaft, door, cab and landing transforms
- Accepted physical host-wall face and thickness
- Exact entrance depth relative to the W229 clear-hatch edge
- Rough opening and operating clear width/height
- Jamb, reveal, frame, sill, threshold and door-leaf construction
- Complete shaft, cab, guide, pit, overhead and machinery transforms
- Independent as-built check
- Printed or independently checked relation between W229 outside enclosure faces and W235 clear-plan faces
- Accepted north-south outside and clear-face controls on the seventh floor
- Masonry wall thickness, finish build-up and opening construction
- Slab opening, pit, overhead, cab, guide rails, brackets and machinery
- Held-out corresponding-face checks across W229, W235 and the seventh-floor architectural plan
- A readable first-floor W217 Section E or applicable companion section with front and back faces and exact profile/depth dimensions for one named component, plus complete width and height endpoints for that same component.
- Printed or independently checked panel extents before any ornament panels are given physical sizes; retain panel instances without fabricated dimensions until then.
- Classified first-floor host wall face, thickness and jamb/reveal/sill/head interfaces tied to named W229 or W230 controls and the corresponding W3 wall or Bay P station.
- An independent corresponding-face or endpoint residual within a stated tolerance for the chosen physical front, preserving conflicts and W3 trace uncertainty separately.
- Complete fine dimension chains and classified rough/finish endpoints
- Member profiles, fasteners, fabrication details and material-code reconciliation
- Historical instance and floor-plan registration
- Companion details, revision authority and independent physical connection checks
- Right-side head/jamb/sill and tel trap door fine callouts need high-resolution crops; no numeric fabrication reading accepted.
- Fine fractions and full dimension chains remain partially unreviewed
- Endpoint classification and companion detail reconciliation
- Source-to-building instance registration and accepted connections
- Exact profile and thickness fractions
- Fastener size, material and anchorage
- Installed instance and floor registration
- Companion revision authority and physical connection checks
- All remaining regions and fabrication notes
- Installed head and opening registration
- Trap plate thickness and frame angle size
- Later-detail plate fraction
- Fasteners and anchorage
- Companion revision authority
- Installed occurrence, room identity and source-to-building registration
- Original/revision authority and as-built correspondence
- Complete member profiles, fixing stations and quantities
- Architectural acceptance and physical geometry remain withheld
- Main floor-plan matrix and section/title/table not reopened
- All-region review remains incomplete
- Trap plate thickness, frame angle components and countersunk fixing remain illegible in this exposure. Plan matrix and installation/world controls not re-reviewed.
- Complete fine dimensions, profiles, materials, finishes, gauges and fastener schedules remain partial.
- Installed quantities, room/storey allocation, governing revision and companion applicability remain unresolved.
- Source-to-building transforms, rough/finish endpoint classes, complete openings and independent physical checks remain outstanding; authoring is withheld.
- Trap checker-plate thickness, angle components and countersunk fixings remain unresolved. Lower plans, sill/jamb chains, equipment/beam schedule and installation/world controls remain partial.
- Complete fine profiles, member sizes, fasteners, finish extents and endpoint classes remain partial.
- Installed quantities, stair/storey/room assignment, closed openings, headroom, source-to-building registration and independent physical checks remain unresolved.
- Governing original/revision and companion applicability remain unresolved; source reading does not approve geometry.
- Complete member/profile dimensions, material/gauge/fastener schedules and exact endpoint classes
- Installed stair/storey/room allocation, quantities, original/revision authority and companion applicability
- Source-to-building registration, complete landing/shaft openings, independent physical checks and architectural acceptance
- Checker plate thickness and frame angle3 components still unclear; countersunk fixing text needs finer companion witness
- Remaining fine fractions, complete member profiles, fastener sizes/materials and finish extents require targeted source review.
- Installed room/floor identity, exact rough/finish/cab/rail endpoints and companion registration remain unresolved.
- Source-to-building transform, installed quantities, independent physical connections and architectural acceptance remain withheld.
- Only right-side upper detail crop inspected; full plan matrix, machine-room/shaft sections and title/material table not visually revisited.
- Trap checker-plate thickness, angle fractions and countersunk fixing text remain unresolved.
- Nickel-steel plate thickness and exact lower jamb/sill/anchor chain remain open.
Download OCR observations (unverified)