← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_1095 · Folder 191

SCREEN DETAILS IN LOBBY — DOORS & END WALLS

Sheet W217

Extraction: Reviewed · extraction partial. Bounded W217 confirmation: Full-sheet title block, Bay P elevator elevation, and the plan note directly below that elevation. Partial entrance-registration review: W217 supplies the separately registered 3-foot-6-inch finished width and 6-foot-9.75-inch finished-floor-to-head height for Elevator No. 1. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays. Normalized from an existing text re-audit; this import did not reopen the source image. Partial W217 review: Bay P elevation identity, complete Bay P plan chain and central paired-door plan station. Elevator-front bounded gate: Bay P Elevator 2 plan station, finished entrance segment, and Elevator 1 similar applicability. W3 Main foyer/public lobby screen physical-polygon gate; source group review remains partial. W3 Main foyer/public lobby screen physical-polygon gate; source group review remains partial. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Partial timed visual review: Source-local drawing evidence only; installed quantity, accepted world placement and physical geometry not established. Partial timed visual review: W217 elevator plan and E-E source-local construction notes; no accepted depth or world placement. Partial timed visual review: undefined

Highlighted reading: Legible nominal face-piece sizes include 1 inch x 2 feet 8 1/2 inches x 4 feet 8 1/2 inches, 1 inch x 3 feet 6 inches x about 4 feet 10 inches, and 1 inch x 1 foot 6 inches x 2 feet 0 inches; red-pencil corrections obscure several final 1/8-inch values and location-to-size mapping is unresolved.. Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

Show every recorded property on this drawing →

Unresolved extraction work

Operating clear width and height after door travel
Rough opening width and height
Sill, threshold and head sections/build-up
Individual leaf widths, thicknesses, overlap and travel
Outer ornamental-surround dimensions
Wall-face assignment and wall thickness
Registered world position and orientation
Accepted physical host-wall face and thickness
Exact entrance depth relative to the W229 clear-hatch edge
Rough opening and operating clear width/height
Jamb, reveal, frame, sill, threshold and door-leaf construction
Complete shaft, cab, guide, pit, overhead and machinery transforms
Independent as-built check
Complete drawing-note transcription
Every dimension and bay placement
Detailed hardware/fastener schedule
Exact cross-sheet bay correspondence
Cross-photo physical deduplication
Complete surviving-object inventory
Exact dimensions
Construction/alteration chronology
Condition assessment
P-6 component extraction
Installed fixture schedule and positions
As-built correspondence
Fixture finish and glass color
All remaining sheet regions and details
Accepted physical wall face and wall thickness
Rough opening and operating clear dimensions
Frame, stile, rail, muntin and trim profiles
Glazing thickness and edge treatment
Push-bar profiles, lengths and elevations
Hardware, threshold, swing and anchorage
Directory case depth and physical world transform
Elevator entrance host-wall thickness, return geometry, rough opening and physical world transform
A readable first-floor W217 Section E or applicable companion section with front and back faces and exact profile/depth dimensions for one named component, plus complete width and height endpoints for that same component.
Printed or independently checked panel extents before any ornament panels are given physical sizes; retain panel instances without fabricated dimensions until then.
Classified first-floor host wall face, thickness and jamb/reveal/sill/head interfaces tied to named W229 or W230 controls and the corresponding W3 wall or Bay P station.
An independent corresponding-face or endpoint residual within a stated tolerance for the chosen physical front, preserving conflicts and W3 trace uncertainty separately.
segment-by-segment material and face classes
accepted W3-to-detail endpoint/face registration with independent held-out check
world XZ footprints and depths for each pier/screen segment
six finished jamb X limits on each side plus rough openings and reveals
door/head and transom limits
checked threshold bottom and finished screen/pier top elevations
resolution of the lobby ceiling reading conflict and scope
securely dimensioned and registered threshold bottom/top
door head and upper glazing bottom/top with clear dimension endpoints
finished screen/pier top on both room sides
front/back finished face assignments and segment-specific transverse depths
accepted W3-to-W217/W218 face/endpoint registration with held-out check
physical XZ segment and six finished door-gap polygons
classified north/south finished face or axis and world Z control
segment-by-segment thickness and joins
accepted west/east pier or bay-division edge class
finished jamb limits on both faces
threshold bottom/top and door head in local Y
finished upper screen and pier bounds
independent held-out metric registration
Fine fractions and complete witness endpoints require targeted high-resolution crops
Companion captures, material code and revision authority require reconciliation
Installed floor/room registration, exact depths and modeling checks outstanding
Remaining W217 details, title/material-code fine print and notes
Exact component depths and classified section endpoints
Revision and companion reconciliation; accepted physical registration
Head/sill depth fractions and front/back endpoint classifications remain unreadable; gauge and section association reused.
Installed instance mapping, world placement, companion/revision authority and whole-building acceptance remain unresolved.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

1 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

f1-public-lobby-w217-bay-p-directoryunreviewed · observed

possible_directory_board_schedule_dimensions

Legible nominal face-piece sizes include 1 inch x 2 feet 8 1/2 inches x 4 feet 8 1/2 inches, 1 inch x 3 feet 6 inches x about 4 feet 10 inches, and 1 inch x 1 foot 6 inches x 2 feet 0 inches; red-pencil corrections obscure several final 1/8-inch values and location-to-size mapping is unresolved.

The schedule covers multiple lobbies and the final corrected fractions and Public Lobby size assignment are not established.

IMG_1095 · sheet-W217 · View drawing ↗

Drawing notation: Legible nominal face-piece sizes include 1 inch x 2 feet 8 1/2 inches x 4 feet 8 1/2 inches, 1 inch x 3 feet 6 inches x about 4 feet 10 inches, and 1 inch x 1 foot 6 inches x 2 feet 0 inches; red-pencil corrections obscure several final 1/8-inch values and location-to-size mapping is unresolved.

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1097 · sheet-W217 · View drawing ↗

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1098 · sheet-W217 · View drawing ↗

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1305 · sheet-W217 · View drawing ↗

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

View all source photographs →