← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_0991 · Folder 193

1186%+2X10"Wi̇ndowai

Original sheet identity has not yet been reconciled.

Extraction: Reviewed · extraction partial. Partial timed visual review: Partial first-pass visual review of public/archive/drawings/complete-upright/IMG_0991.webp after catalogue and OCR. Coordinates are normalized access-image coordinates before any rotation. Actual access image requires 0 degrees rotation to read. Selected evidence only; no geometry/modeling inference. Cropped companion sheets visible behind foreground drawing are excluded. Partial timed visual review: undefined Partial timed visual review: Bounded hardware, profile and support note review; no building placement or accepted geometry. Partial timed visual review: Source-local depicted assembly or specification only. No installed quantities, accepted floor geometry or model placement inferred. Partial timed visual review: Source-local fabrication detail and bill only; installed occurrence and revision authority remain unresolved. Partial timed visual review: Depicted type/component, shop order or source-local assembly only. Components and grille order quantities do not create installed fixtures or establish electrical outlet-to-type assignments.

Unresolved extraction work

Complete small-dimension and callout transcription
Review handwritten revisions and faint annotations
Identify all instances and companion detail relationships
Register detail geometry against building locations
Installed instances, quantities and source-to-building registration remain unestablished.
Complete dimensions, machining profiles, companion sheets and governing revision authority remain open.
Remaining section and profile dimensions and witness endpoints
Companion revision authority, installed instance registration and quantities
Remaining fine dimensions and handwritten revisions require targeted higher-resolution evidence
Companion registration and physical instance mapping remain unresolved
Remaining profile chains and full machining details
Companion/revision authority and physical registration
Remaining fine fractions, outline profiles, machining endpoints and marginal handwriting require targeted master review.
Full companion and revision authority audit remains open.
Installed instance quantities, room/floor placement, hosts and source-to-building registration are unestablished.
Existing sectionreadings reused text-only; crop didnot re-inspect sections. Fine profiles remain open.
Selected enlargedcrop resolves⅜CSK andditto parent. Right continuation andmaterial/WT columns clipped.6⅛lengthclosedIDreused.
Known31shoporder retained separately frominstalledcount. Layout outsidecrop reused text-only, no whole-sourcereview claim.
Fullbill continuation andsame-sheet revisions remainopen.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

51 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

closure1011aa-img0991-countersunk-screwverified · printed

bill_screw_quantity

620 ⅜" × 2" CSK. SCREWS

620 count

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Fabrication order count; not installed count.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 620 ⅜" × 2" CSK. SCREWS

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Fabrication order count; not installed count.

Calculated from: fabrication1013j-img0991-029-bill_screw_diameter_verified_reread, fabrication1013j-img0991-030-bill_screw_type

closure1011aa-img0991-countersunk-screwverified · printed

bill_screw_length

⅜" × 2"

2 in

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Length of governing bill screw row.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: ⅜" × 2"

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Length of governing bill screw row.

Calculated from: fabrication1013j-img0991-030-bill_screw_type

closure1011aa-img0991-countersunk-screwverified · printed

second_bill_screw_quantity

744 5/16" × 1¼" ″

744 count

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Literal ditto resolves to governing CSK. SCREWS row, not machine bolts.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 744 5/16" × 1¼" ″

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Literal ditto resolves to governing CSK. SCREWS row, not machine bolts.

Calculated from: fabrication1013j-img0991-030-bill_screw_type

closure1011aa-img0991-countersunk-screwverified · printed

second_bill_screw_diameter

5/16" × 1¼" ″

0.3125 in

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Second screw-row diameter.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 5/16" × 1¼" ″

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Second screw-row diameter.

Calculated from: fabrication1013j-img0991-030-bill_screw_type, fabrication1013j-img0991-033-second_bill_screw_quantity

closure1011aa-img0991-countersunk-screwverified · printed

second_bill_screw_length

5/16" × 1¼" ″

1.25 in

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Second screw-row length.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 5/16" × 1¼" ″

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Second screw-row length.

Calculated from: fabrication1013j-img0991-030-bill_screw_type, fabrication1013j-img0991-033-second_bill_screw_quantity

parallel-img0991-fasteningverified · printed

button_head_screw_quantity

3720 ⅛" × ½" BUTTON HEAD SCREWS

3720 count

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Fabrication row quantity.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 3720 ⅛" × ½" BUTTON HEAD SCREWS

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Fabrication row quantity.

parallel-img0991-fasteningverified · printed

button_head_screw_diameter

⅛" × ½"

0.125 in

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: ⅛" × ½"

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry.

parallel-img0991-fasteningverified · printed

button_head_screw_length

⅛" × ½"

0.5 in

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: ⅛" × ½"

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry.

parallel-img0991-fasteningverified · printed

machine_bolt_quantity

186 ⅝" × 1½" MACHINE BOLTS

186 count

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Separate machine-bolt row; ditto above does not refer forward.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 186 ⅝" × 1½" MACHINE BOLTS

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Separate machine-bolt row; ditto above does not refer forward.

parallel-img0991-fasteningverified · printed

machine_bolt_length

⅝" × 1½" MACHINE BOLTS

1.5 in

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Bolt diameter reused from prior sectional property.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: ⅝" × 1½" MACHINE BOLTS

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Bolt diameter reused from prior sectional property.

Calculated from: parallel-img0991-fastening-m007

closure1011aa-img0991-masonry-anchorverified · printed

bill_masonry_anchor_width

186 ½" × 2" × 6⅛" MASONRY [continuation clipped]

2 in

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Width in bill triplet. Existing verified 6⅛in length reused; earlier 6⅜ candidate remains preserved.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 186 ½" × 2" × 6⅛" MASONRY [continuation clipped]

Calculated from: hardware1012s-991-bill-masonry-anchor-length

View all source photographs →